Bartoline TX10 Paint and Varnish Stripper 1 Litre

Bartoline TX10 Paint and Varnish Stripper 1 Litre is an extremely non-Methylene Chloride stripper. Suitable for use on wood, metal, glass, plaster and concrete. Ideal for use by inexperienced DIYers as well as professional users. The non-caustic formulation is quick and easy to use, both indoors and out, and can remove multiple layers at a time.

• Methylene Chloride free formulation
• Minimal evaporation
• Non-flammable
• Non-drip, ideal for vertical surfaces
• Suitable for use on wood, metal, glass, plaster and concrete

Application: Removal of old paint and varnishes, including polyurethane.

• Suitable for use on wood, metal, glass, plaster and concrete. May not be used on plastics. Also suitable for removing old hardened paint from paint brushes, rollers and tools.
• Coverage: 1 Litre is sufficient to strip a surface area of approximately 1 square metre.

Direction of use:

• Pour a quantity of Bartoline TX10 Paint and Varnish Stripper into a suitable container.
• Apply a generous, thick even coat (do not brush out) at a rate of 1 litre per square metre, onto the surface to be stripped, with a suitable brush.
• Leave for approximately 1 hour and apply a second coat. For areas where there are less than 5 layers of paint or varnish, a second coat may not be necessary.
• Once the stripper has softened the paint, scrape off, leaving surface as clean as possible.
• Repeat process if necessary. Rub down stripped area using a scrubbing brush or stainless steel pad (DO NOT USE WIRE WOOL).
• Wash down stripped area with Bartoline Clean Spirit or detergent and water. Rinse with clean water and allow to dry.